Product Description
- 90-Degree Angle Designed for Corner Posts
- Makes it Easy to Install Top Rail, Brace Rails, Tension Wire or Barb Wire on Corner Posts
- Beveled Design Provides Additional Strength vs. Flat Bands
- Galvanized Finish Protects Against Rust & Corrosion
90-Degree Corner Brace Bands are designed for attaching horizontal brace railing to chain link corner posts. These bands eliminate the need to use two regular brace bands per rail on your corner post, and they also keep all of your brace rails at the same height.
Specifications
| Brace Band Size |
2" |
2-1/2" |
3" |
| Actual Post Size (O.D) | 1-7/8" | 2-3/8" | 2-7/8" |
| Weight | .25 lbs | .3 lbs | .4 lbs |
| Material | Galvanized Steel | Galvanized Steel | Galvanized Steel |
| Finish | Silver | Silver | Silver |
| Hardware | Set Screw (Included) | Set Screw (Included) | Set Screw (Included) |
| Typical Usage | Commercial Security Fence | Commercial Security Fence | Commercial / Industrial Security Fence |
Installation
Place the large open end piece around your post and close it with the smaller piece. Use two 5/16" x 1-1/4" carriage bolts (not included) to secure it shut. If using with brace railing, purchase two appropriately sized rail end caps and sandwich each one between the two pieces of the brace band so that the bolt goes through the band and the rail end. If using with barb wire or tension wire, wrap the wire around the carriage bolt and then bend the wire back around itself several times.
